home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Gold Medal Software 1
/
Gold Medal Software Volume 1 (Gold Medal) (1994).iso
/
drivers
/
hpsj2drv.arj
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-07-23
|
4KB
|
144 lines
(C) Hewlett-Packard 12, July 1993
=================================
This is the README.TXT file for the HP ScanJet II series scanner driver
that functions with third-party SCSI cards conforming to the ASPI or CAM
specification. The following files should be on this disk:
README.TXT ... Text file with product information and installation
instructions (the file you are now reading).
SJIIX.SYS ... HP ScanJet series II scanner driver designed to work with
third-party SCSI cards conforming to the ASPI or CAM
specification.
FINDSCSI.EXE ... Executable file that determines if the scanner driver
SJIIX.SYS will work with installed third-party SCSI
card.
SJIITEST.EXE ... Executable file that tests data communications
integrity between the HP ScanJet series II scanner and
the installed third-party SCSI card.
INSTALLATION
============
1. Run FINDSCSI.EXE to determine whether your SCSI card is compatible
with SJIIX.SYS. If it is not, contact your SCSI card manufacturer to get
an ASPI or CAM driver. (If your manufacturer does not supply an ASPI or
CAM driver, you cannot use SJIIX.SYS to run your HP ScanJet series II
scanner on your SCSI card.)
2. Copy SJIIX.SYS into the same directory where SJII.SYS exists
(C:\DESKSCAN is the default directory).
3. Edit your CONFIG.SYS file to place SJIIX.SYS below your ASPI or CAM
manager. The ASPI or CAM device driver is typically the first statement
in CONFIG.SYS. Here is a sample CONFIG.SYS listing:
(ASPI MANAGER) DEVICE=C:\SCSI\ASPI4DOS.SYS /D
DEVICE=C:\DOS\SETVER.EXE
FILES= 50
BUFFERS=2
DEVICE=C:\QEMM\QEMM386.SYS RAM X=B000-BFFF
STACKS=9,256
DOS=HIGH,UMB
DEVICE=C:\ADAPTEC\ASPIDISK.SYS /D
(Scanner driver) DEVICEHIGH=C:\SCSI\SJIIX.SYS
SHELL=C:\DOS\COMMAND.COM C:\DOS\ /e:1000 /p
DEVICEHIGH=C:\DOS\DBLSPACE.SYS /MOVE
4. Delete the old SJII.SYS device driver.
5. Save your CONFIG.SYS changes and reboot.
NOTE: ASPI and CAM managers will have different device names. Here are a
few examples:
ASPI Manager for an Adaptec AHA-1540 SCSI card
device=c:\aspi4dos.sys
CAM Manager for a Future Domain 1680 SCSI card
device=c:\scsi\futurdom\dcam1800.exe
ASPI mananger for an UltraStor 14F SCSI card
device=c:\uspi14.sys
TESTED SYSTEMS
===================
SJIIX.SYS was tested on the following 386 and 486 systems running DOS
5.0 and/or 6.0 from the following vendors (OS/2 is not supported)
AIR
AMAX
Axik
Berlin
Cache
Compaq
Gateway
Hetra
Hewlett-Packard
HIQ
IBM
MicroComp
Micronix
Nice
Northgate
Shuttle
TMC
Toshiba
TESTED APPLICATIONS
===================
The following applications have been tested with SJIIX.SYS using TWAIN
or the application's scanning utility, and appear to function normally.
Aldus: PhotoStyler
Arkenstone: Arkenstone Reader II
Caere: FaxMaster, OmniPage Direct, OmniPage Professional, PageKeeper
Calera: TrueScan, WordScan, WordScan Plus
Corel: Corel Draw
Delrina: WinFax, WinFax Pro
Eclipse systems: Eclipse fax
ExperVision: TypeReader
Image-In: Image-In
Intel: Satisfaction
Light Source: Ofoto
Micrografx: Picture Publisher
Pixel Translations: Open Book
RIX Software: WinRix
Westbrook: File Magic
WordStar/ZSoft: Publisher's Paintbrush, PhotoFinish
TESTED SCSI CARDS
=================
The following SCSI cards have been tested with SJIIX.SYS using DeskScan
II or one of the above mentioned applications, and appear to function
normally.
Adaptec: AHA-1510, AHA-1520, AHA-1540, AHA-1542, AHA-1740, AHA-1742
Always: IN-2000
BusLogic: BT-742A, BT-545S
Corel: LS2000
DTC: 3280AS
Future Domain: 1680
** Trantor: MA348, T348
UltraStor: 14F, 24F, 34F
KNOWN ISSUES
============
** SJIIX.SYS has difficulties maintaining communication protocol with
the TRANTOR MA348 Parallel-to-SCSI adapter. This results in intermittent
communications error messages within DeskScan II. HP is working with
Trantor to identify the cause of the problem and implement a solution.